(For the technically knowledgeable only) The TM-2030 has a serial data output of all the “real time” data-which could be used to access data for other control or output in, for example OEM applications.
The TM-2030 has a “simplified” level of operation suitable for most users, but can be configured for more flexibility (and complexity) where occasionally required.The TM-2030 can also monitor the voltage only of a second battery, such as a starting battery, or possibly also the input voltage of a solar array (if less than 100 volts.).This also provides lightning protection for the TM-2020. The TM-2020 will operate with 12 or 24 V systems, but requires the addition of the “TM-48VA” Adapter and lightning protection board when using it with 48V battery systems. The TM-2030 will operate with (nominal) battery systems from 12 to 48V.The TM2030 has some minimal data logging, which can be useful for a technician to diagnose some common setup or operational problems with battery systems.The TM2030 is easier for you to program the necessary system parameters. How many days since the batteries were fully charged: to remind you to not wait too long between fully charging your batteries to maximize their life.Energy going in, or out of your batteries, measured in amps or watts, so you can see that your charging sources are charging properly, or how much current your loads are using.Volts of the batteries, for example to check that they are being charged at proper voltage.“Percent Full” (“State of charge”) of your batteries, so you can see if you need to charge them more, or check that overall usage is less than your charging resources.
A SHUNT is required, and which in some systems is already installed.Īll models are designed to monitor the following: They will help you maintain your batteries.
TRIMETRIC BATTERY MONITOR GENERATOR
The TriMetric is used to monitor battery systems used in remote homes, RVs or boats that have batteries that store solar, wind, or possibly generator powered chargers.
0 kommentar(er)
